SKF 6313 M/C3

Bearings,Ball Bearings,Radial & Deep Groove Ball Bearings,6313 M/C3
SKF 6313 M/C3
Radial/Deep Groove Ball Bearing-Metric - 65 mm ID, 140 mm OD, 33 mm Width, Open, C3

Bore Diameter:	65 mm
Outside Diameter:	140 mm
Overall Width:	33 mm
Bore Type:	Round
Closure Type:	Open
Row Type & Fill Slot:	Single Row Non-Fill Slot
Snap Ring Included:	Without Snap Ring
Internal Clearance:	C3
Dynamic Load Capacity:	97.5 kN
Static Load Capacity:	60 kN
Precision Rating:	Not Rated
Finish/Coating:	Uncoated
Cage Material:	Brass
Outer Ring Width:	33 mm
Fillet Radius:	2 mm
Maximum RPM:	6700 RPM
Series:	63

The quality requirements of the SKF 6313 M/C3 to suppliers have been aggregated hereinafter on the basis of international quality standards.
As a company adhering to the industry’s best practices, we know and understand SKF 6313 M/C3, the competitive and driving forces of the industry and the need for enduring and changing distribution values.
The quality requirements of SKF 6313 M/C3 to suppliers of packaging material and packaging services .
The valid version of the individual documents is available at our website.
SKF 6313 M/C3 applications have been in existence for many years. The predominant failure mode in many SKF 6313 M/C3 applications is mechanical seal failure leading to coolant leakage. In many instances, this can lead to coolant contamination of the bearing, causing lubrication failure of the bearing. Because of this common failure mode, it is likely that other types of water pump bearing failures were not studied as much or understood in as much detail as they should have been.