Industrial Bearings Inc
  • AddressToh Guan Centre, 31/F,69 Toh Guan Rd E, Singapore 608609
  • Factory AddressToh Guan Centre, 31/F,69 Toh Guan Rd E, Singapore 608609
  • Worktime9:00-18:00
  • Phone(Working Time)0065-31591578
  • Phone(Nonworking Time)0065-31591578
  • Fax0065-31591339

Four-Row Cylindrical Roller Bearings

Contact Now

Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.

Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.

Bearing features

  • Exceptional high load carrying capacity
    Because of their high number of rollers, four-row cylindrical roller bearings are suitable for very heavy radial loads.
  • Low friction (Roller end / flange contact area)
    The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction.
  • Long service life
    The logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection.

Bearing 200ARVSL1567 222RYSL1567

1 pcs Negotiable

Bearing 220ARVSL1621 246RYSL1621

1 pcs Negotiable

Bearing 190RY1528 RY-1

1 pcs Negotiable

Bearing 900ARXS3444 989RXS3444

1 pcs Negotiable

Bearing 850ARXS3365 940RXS3365

1 pcs Negotiable

Bearing 820RX3201A RX-10

1 pcs Negotiable

Bearing 510ARXS2461 569RXS2461

1 pcs Negotiable

Bearing 820ARXS3264 903RXS3264

1 pcs Negotiable

Bearing 730ARXS3064 809RXS3064A

1 pcs Negotiable

Bearing 730ARXS3064 809RXS3064

1 pcs Negotiable

Bearing 770RX3151 RX-1

1 pcs Negotiable

Bearing 730RX3064A RX-1

1 pcs Negotiable
4/14