Industrial Bearings Inc
  • AddressToh Guan Centre, 31/F,69 Toh Guan Rd E, Singapore 608609
  • Factory AddressToh Guan Centre, 31/F,69 Toh Guan Rd E, Singapore 608609
  • Worktime9:00-18:00
  • Phone(Working Time)0065-31591578
  • Phone(Nonworking Time)0065-31591578
  • Fax0065-31591339

four-row tapErEd rollEr BEaringS tQitS

Contact Now

These bearings are specially designed for rolling mill applications where their thin cross-section height and increased width provide higher capacity. The difference between a TQO bearing and a 2TDIW bearing design are relatively minor, as each uses two TDI cones.The TQO design uses: two TDI cones, one double cup in the middle, two single cups one on each end, two cup spacers, and a cone spacer.The 2TDIW design uses: two TDI cones, four single cups, three cup spacers. The cones are match ground, therefore no cone spacer is required.Either design can be supplied depending on the preference of the mill; however, the TQO is the most commonly used design.
There are a variety of special features that can be incorporated in the design of four row bearings, such as: face notches, helical bore grooves, extended cones, re-lubrication accommodations, cup and/or cone seals, etc.All TQO bearings have their BEP pre-set at the factory. Many standard bearings exist with several different BEP values, depending on mill preference and the way they operate. Consequently, all TQO numbers will have an “LXX” suffix on the end indicating the nominal BEP value in thousandths of an inch.

Bearing m275330T m275310d double cup

1 pcs Negotiable

Bearing lm239530T lm239512d double cup

1 pcs Negotiable

Bearing lm286733T lm286710 single cup

1 pcs Negotiable

Bearing lm247730T lm247710d double cup

1 pcs Negotiable

Bearing m272730T m272710cd double cup

1 pcs Negotiable

Bearing Hm259030T Hm259011d double cup

1 pcs Negotiable

Bearing Hm259030T Hm259011d double cup

1 pcs Negotiable

Bearing m255429T m255411 single cup

1 pcs Negotiable

Bearing m252330T m252310cd double cup

1 pcs Negotiable

Bearing lm742730T lm742714d double cup

1 pcs Negotiable

Bearing lm288130T lm288110 single cup

1 pcs Negotiable

Bearing lm283630T lm283610 single cup

1 pcs Negotiable
3/4