Home > 
TTHDFL thrust tapered roller bearing

TTHDFL thrust tapered roller bearing

 (65)

Available with cylindrical or spherical rollers, NSK's thrust roller bearings sustain only axial loads, but they are suitable for heavy loads and have high axial rigidity. Spherical thrust roller bearings contain convex rollers and have a self- aligning capability and are free of any influence of mounting error or shaft deflection. Standard cages are machined brass, where the E-type offers a pressed cage for high load capacity.

Bearing features

  • Separable design
    The shaft and housing washers and the roller and cage thrust assemblies of tapered roller thrust bearings with cages can be mounted separately.
  • Low friction
    The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear.
  • Long service life
    Depending on the design, crowned or logarithmic raceway profiles optimize the load distribution along the contact surfaces, reduce stress peaks at the roller ends, and reduce the sensitivity to misalignment compared with conventional straight raceway profiles.
  • Consistency of roller profiles and sizes
    The rollers incorporated in SKF tapered roller thrust bearings are manufactured to such close dimensional and geometrical tolerances that they are practically identical. This provides optimal load distribution, and reduces noise and vibration.
Industrial Bearings Inc
Mobile : 0065-31591338
Website : www.bearing-inc.com
Telephone : 0065-31591578
Mail : molly@bearing-inc.com
Fax : 0065-31591339
Address : Toh Guan Centre, 31/F,69 Toh Guan Rd E, Singapore 608609

Copyright © 2017 - 2019Industrial Bearings Inc All Rights Reserved