Home > 
Four Row Cylindrical Roller Bearings NTN

Four Row Cylindrical Roller Bearings NTN

 (217)

Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.

Bearing features

  • Exceptional high load carrying capacity
    Because of their high number of rollers, four-row cylindrical roller bearings are suitable for very heavy radial loads.
  • Low friction (Roller end / flange contact area)
    The open flange design together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction.
Industrial Bearings Inc
Mobile : 0065-31591338
Website : www.bearing-inc.com
Telephone : 0065-31591578
Mail : molly@bearing-inc.com
Fax : 0065-31591339
Address : Toh Guan Centre, 31/F,69 Toh Guan Rd E, Singapore 608609

Copyright © 2017 - 2018Industrial Bearings Inc All Rights Reserved